Motor Thermal Protection - ABB ACS880 Series Firmware Manual

No. Name/Value
35
35 Motor thermal
protection
35.01 Motor estimated
temperature
-60 ... 1000
°C or °F
35.02 Measured
temperature 1
-60 ... 5000 °C,
-76 ... 9032 °F,
0 ohm or
[35.12] ohm
35.03 Measured
temperature 2
-60 ... 5000 °C,
-76 ... 9032 °F,
0 ohm or
[35.22] ohm
Description
Motor thermal protection settings such as temperature
measurement configuration, load curve definition and motor
fan control configuration.
See also section

Motor thermal protection

Displays the motor temperature as estimated by the internal
motor thermal protection model (see parameters
35.50...35.55). The unit is selected by parameter
selection
This parameter is read-only.
Estimated motor temperature.
Displays the temperature received through the source
defined by parameter 35.11 Temperature 1
selected by parameter 96.16 Unit
Note: With a PTC sensor, the unit is ohms.
This parameter is read-only.
Measured temperature 1.
Displays the temperature received through the source
defined by parameter 35.21 Temperature 2
is selected by parameter
Note: With a PTC sensor, the unit is ohms.
This parameter is read-only.
Measured temperature 2.
(page 80).
source. The unit is
selection.
source. The unit
96.16 Unit selection.
Parameters 275
Def/FbEq16
-
96.16 Unit
1 = 1°
-
1 = 1 unit
-
1 = 1 unit