Application Programming - ABB ACS880 Series Firmware Manual

Outputs available to the adaptive program
Output
Limitations
Minimum torque 2
Maximum torque 2
Events
External event 1
External event 2
External event 3
External event 4
External event 5
Data storage
Data storage 1 real 32
· · ·
Data storage 8 real 32
Process PID
Set 1 setpoint 1
Set 1 setpoint 2
Set 1 feedback 1
Set 1 feedback 2
Set 1 (PID controller) gain
Set 1 (PID controller) integration time
Set 1 tracking mode
Set 1 track reference


Application programming

The functions of the firmware program can be extended with application
programming. Application programmability is optionally available for the ACS880
primary control program.
Application programs can be built out of function blocks based on the IEC 61131-3
standard using a PC tool available separately.
For more information, see Programming manual: Drive application programming
(IEC 61131-3) (3AUA0000127808 [English]).
Target
30.21 Minimum torque 2 source
30.22 Maximum torque 2 source
31.01 External event 1 source
31.03 External event 2 source
31.05 External event 3 source
31.07 External event 4 source
31.09 External event 5 source
47.01 Data storage 1 real32
· · ·
47.08 Data storage 8 real32
40.16 Set 1 setpoint 1 source
40.17 Set 1 setpoint 2 source
40.08 Set 1 feedback 1 source
40.09 Set 1 feedback 2 source
40.32 Set 1 gain
40.33 Set 1 integration time
40.49 Set 1 tracking mode
40.50 Set 1 tracking ref selection
Program features 29