ABB ACS880 Series Firmware Manual page 269

No. Name/Value
Other [bit]
33.24 On-time 2 warn
message
On-time 2
exceeded
Clean device
Maintain additional
cool fan
Maintain cabinet
fan
Maintain DC
capacitors
Maintain motor
bearing
33.30 Edge counter 1
actual
0...4294967295
33.31 Edge counter 1
warn limit
0...4294967295
Description
Source selection (see Terms and abbreviations
Selects the optional warning message for on-time timer 2.
A887 On-time 2. The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
A88C Device clean.
A890 Additional cooling.
A88E Cabinet fan.
A88D DC capacitor.
A880 Motor bearing.
Actual present value of signal edge counter 1.
The counter is incremented every time the signal selected by
parameter 33.33 Edge counter 1 source
either, depending on the setting of
function). A divisor may be applied to the count (see
Edge counter 1 divider).
When the counter exceeds the limit set by
counter 1 warn limit, bit 2 of
The warning specified by
message is also given if enabled by
function.
The counter can be reset from the Drive composer PC tool, or
from the control panel by keeping Reset depressed for over 3
seconds.
Actual present value of signal edge counter 1.
Sets the warning limit for signal edge counter 1.
Warning limit for signal edge counter 1.
on page 112). -
switches on or off (or
33.32 Edge counter 1
33.31 Edge
33.01 Counter status
33.35 Edge counter 1 warn
33.32 Edge counter 1
Parameters 269
Def/FbEq16
On-time 2
exceeded
1
6
7
8
9
10
-
33.34
is set to 1.
-
0
-