ABB ACS880 Series Firmware Manual page 359

No. Name/Value
61.151 INU-LSU data set
10 data 1 sel
None
LSU CW
DC voltage
reference
Reactive power
reference
Other
61.152 INU-LSU data set
10 data 2 sel
61.153 INU-LSU data set
10 data 3 sel
61.201 INU-LSU data set
10 data 1 value
0...65535
61.202 INU-LSU data set
10 data 2 value
0...65535
61.203 INU-LSU data set
10 data 3 value
0...65535
Description
(Parameters 61.151...61.203
unit)
Parameters 61.151...61.153
set 10 to another converter (typically the supply unit of the
drive).
Parameters 61.201...61.203
other converter. If no data has been preselected, the value to
be sent can be written directly into these parameters.
For example, this parameter preselects the data for word 1 of
data set 10. Parameter
value displays the selected data in integer format. If no data is
preselected, the value to be sent can be written directly into
parameter 61.201.
None.
Control word for the supply unit.
94.20 DC voltage reference
94.30 Reactive power reference
Source selection (see Terms and abbreviations
Preselects the data to be sent as word 2 of data set 10 to the
other converter.
See also parameter 61.202 INU-LSU data set 10 data 2
value.
For the selections, see parameter
10 data 1 sel.
Preselects the data to be sent as word 3 of data set 10 to the
other converter.
See also parameter 61.203 INU-LSU data set 10 data 3
value.
For the selections, see parameter
10 data 1 sel.
Displays (in integer format) the data to be sent to the other
converter as word 1 of data set 10.
If no data has been preselected by
10 data 1 sel, the value to be sent can be written directly into
this parameter.
Data to be sent as word 1 of data set 10.
Displays (in integer format) the data to be sent to the other
converter as word 2 of data set 10.
If no data has been preselected by
10 data 2 sel, the value to be sent can be written directly into
this parameter.
Data to be sent as word 2 of data set 10.
Displays (in integer format) the data to be sent to the other
converter as word 3 of data set 10.
If no data has been selected by
data 3 sel, the value to be sent can be written directly into this
parameter.
Data to be sent as word 3 of data set 10.
only visible with a BCU control
preselect data to be sent in data
display the data to be sent to the
61.201 INU-LSU data set 10 data 1
(page 387).
(page 388).
61.151 INU-LSU data set
61.151 INU-LSU data set
61.151 INU-LSU data set
61.152 INU-LSU data set
61.153 INU-LSU data set 10
Parameters 359
Def/FbEq16
None;
LSU CW
(95.20 b11,
95.20 b15)
0
22
24084
24094
on page 112). -
None; DC
voltage
reference
(95.20 b15)
None;
Reactive
power
reference
(95.20 b15)
0
0
0