ABB ACS880 Series Firmware Manual page 315

No. Name/Value
45.13 Energy tariff 2
0.000 ...
4294967.295 units
45.14 Tariff selection
Energy tariff 1
Energy tariff 2
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
45.17 Tariff currency unit
Local currency
EUR
USD
45.18 CO2 conversion
factor
0.000 ... 65.535
tn/MWh
45.19 Comparison power
0.0 ... 100000.0 kW Motor power.
45.21 Energy calculations
reset
Done
Reset
Description
Defines energy tariff 2 (price of energy per kWh).
See parameter 45.12 Energy tariff
Energy tariff 2.
Selects (or defines a source that selects) which pre-defined
energy tariff is used.
0 = 45.12 Energy tariff 1
1 = 45.13 Energy tariff 2
0.
1.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
Specifies the currency used for the savings calculations.
Local currency. The name of the currency can be edited by
choosing Menu - Settings - Edit texts on the control panel.
Euro.
US dollar.
Defines a factor for conversion of saved energy into CO
emissions (kg/kWh or tn/MWh).
Factor for conversion of saved energy into CO
Actual power that the motor absorbs when connected direct-
on-line and operating the application. The value is used for
reference when energy savings are calculated.
Note: The accuracy of the energy savings calculation is
directly dependent on the accuracy of this value. If nothing is
entered here, then the nominal motor power is used by the
calculation, but that may inflate the energy savings reported
as many motors do not absorb nameplate power.
Resets the savings counter parameters
Reset not requested (normal operation), or reset complete.
Reset the savings counter parameters. The value reverts
automatically to Done.
1.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 112). -
emissions.
2
45.01...45.09
Parameters 315
Def/FbEq16
2.000 units
-
Energy tariff
1
0
1
2
3
4
5
6
7
10
11
EUR
100
101
102
0.500
2
tn/MWh
1 = 1 tn/MWh
0.0 kW
See par.
46.04
Done
0
1