ABB ACS880 Series Firmware Manual page 364

364 Parameters
No. Name/Value
62.45 Data set 1 data 1
selection
None
CW 16bit
Ref1 16bit
Ref2 16bit
Other
62.46 Data set 1 data 2
selection
62.47 Data set 1 data 3
selection
... ...
62.50 Data set 3 data 3
selection
62.51 Data set 10 data 1
selection
None
CW 16bit
Ref1 16bit
Ref2 16bit
Other
62.52 Data set 10 data 2
selection
62.53 Data set 10 data 3
selection
Description
Parameters 62.45...62.50
received in data sets 1 and 3 from the external controller.
These data sets are used in ModuleBus communication with
a "standard drive" (60.50 DDCS controller drive type
standard drive).
Parameters 62.95...62.100
external controller in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of
data set 1. Parameter 62.95 Data set 1 data 1 value
the received data in integer format, and can also be used as a
source by other parameters.
None.
Control Word (16 bits)
Reference REF1 (16 bits)
Reference REF2 (16 bits)
Source selection (see Terms and abbreviations
Defines a target for the data received as word 2 of data set 1.
See also parameter 62.96 Data set 1 data 2
For the selections, see parameter
selection.
See parameter 62.45 Data set 1 data 1
...
See parameter 62.45 Data set 1 data 1
Parameters 62.51...62.74
received in data sets 10, 12, 14, 16, 18, 20, 22 and 24 from
the external controller.
Parameters 62.101...62.124
the external controller in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of
data set 10. Parameter
displays the received data in integer format, and can also be
used as a source by other parameters.
None.
Control Word (16 bits)
Reference REF1 (16 bits)
Reference REF2 (16 bits)
Source selection (see Terms and abbreviations
Defines a target for the data received as word 2 of data set
10.
See also parameter 62.102 Data set 10 data 2
For the selections, see parameter
selection.
Defines a target for the data received as word 3 of data set
10.
See also parameter 62.103 Data set 10 data 3
For the selections, see parameter
selection.
define a target for the data
display the data received from the
value.
62.45 Data set 1 data 1
selection.
selection.
define a target for the data
display the data received from
62.101 Data set 10 data 1 value
value.
62.51 Data set 10 data 1
value.
62.51 Data set 10 data 1
Def/FbEq16
None
= ABB
displays
0
1
2
3
on page 112). -
None
None
...
None
None
0
1
2
3
on page 112). -
None
None