ABB ACS880 Series Firmware Manual page 14

14 Introduction to the manual
Term/abbre- Definition
viation
FIO-01 Optional digital I/O extension module
FIO-11 Optional analog I/O extension module
FPBA-01 Optional PROFIBUS DP adapter
FPTC-01 Optional thermistor protection module. Not released for sales at the time of
publication.
FPTC-02 Optional ATEX-certified thermistor protection module for potentially explosive
atmospheres. Not released for sales at the time of publication.
FSCA-01 Optional Modbus/RTU adapter
FSO-xx Optional safety functions module
HTL High-threshold logic
ID run Motor identification run. During the identification run, the drive will identify the
characteristics of the motor for optimum motor control.
IGBT Insulated gate bipolar transistor; a voltage-controlled semiconductor type
widely used in inverters and IGBT supply units due to their easy controllability
and high switching frequency
INU-LSU Type of optical
example the
Inverter unit In large drives (> 500 kW approx.), the part of the drive that converts DC to
AC for the motor. Consists of one or more inverter modules and their auxiliary
components.
I/O Input/Output
ISU An IGBT supply unit; type of supply unit implemented using IGBT switching
components, used in regenerative and low-harmonic drives.
Line-side See
converter
LSU See
ModuleBus A communication link used by, for example, ABB controllers. ACS880 drives
can be connected to the optical ModuleBus link of the controller.
Motor-side See
converter
Network With fieldbus protocols based on the Common Industrial Protocol (CIP
control such as DeviceNet and Ethernet/IP, denotes the control of the drive using the
Net Ctrl and Net Ref objects of the ODVA AC/DC Drive Profile. For more
information, see www.odva.org, and the following manuals:
• FDNA-01 DeviceNet adapter module User's manual (3AFE68573360
[English]), and
• FENA-01/-11 Ethernet adapter module User's manual (3AUA0000093568
[English]).
Parameter User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
PID controller Proportional–integral–derivative controller. Drive speed control is based on
PID algorithm.
DDCS communication link between two converters, for
supply unit and the
supply unit.
supply unit.
inverter unit.
inverter unit of a drive system.
TM
),