ABB ACS880 Series Firmware Manual page 514

514 Fieldbus control through the embedded fieldbus interface (EFB)
Parameter
PROCESS PID FEEDBACK AND SETPOINT
40.08 Set 1 feedback
1 source
40.16 Set 1 setpoint 1
source
SYSTEM CONTROL INPUTS
96.07 Parameter save
manually
Setting for
fieldbus control
Feedback data
storage
Setpoint data storage
Save (reverts to
Done)
Function/Information
Connect the bits of the storage parameter
(10.99 RO/DIO control
input/outputs of the drive.
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
word) to the digital