H3C S9500 Series Command Manual page 1836

Command Manual – ACSEI Server
H3C S9500 Series Routing Switches
Examples
# Enable terminal monitor and all ACSEI debuggings.
<H3C> debugging acsei server all
1.1.8 display acsei client info
Syntax
display acsei client info [ client-id ]
View
Any view
Parameters
client-id: ID of an ACSEI client whose information is to be displayed, in the range 1 to
12.
Description
Use the display acsei client info command to display the ACSEI client information.
The client information is retrieved from the advertisement packet sent by the client, so
that when there is no ACSEI client information, the command displays the information
keywords only.
If executed without the client-id argument, the command displays information about all
the ACSEI clients in order of registration time.
Examples
# Display information about all ACSEI clients.
<H3C> display acsei client info
Total Client Number: 1
Client ID: 1
Client Description: SecBlade LB
Hardware: A.0
System Software: COMWAREV500R002B53D001
Application Software: V300R002B01D002
CPU: RMI XLR732 1000MHz
PCB Version: A.0
CPLD Version: 1.0
Bootrom Version: Basic BootRom Version:1.11,Extend BootRom Version:1.17
CF card: 0M Bytes Compact Flash Storage Device
Memory: 1024M Bytes DDR2 SDRAM Memory
Harddisk:
Chapter 1 ACSEI Server Configuration Commands
1-5