H3C S9500 Series Command Manual page 1732

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
[H3C-lanswitch3/1/3-/] set priority high 1
1.3.35 set qos_weight
Syntax
set qos_weight weight
undo set qos_weight
View
lanswitch view
Parameters
weight: QoS weights of the ports with high priority, in the range of 1 to 10.
Description
Use the set qos_weight command to set the QoS weights of the ports of an Ethernet
switch with high priority.
Use the undo set qos_weight command to remove the setting.
The QoS weights of the ports with low priority are fixed to 1. By executing the set
qos_weight command, you can have the ratio of the number of packets forwarded by
ports with high priority to those with low priority ports is weight: 1.
Related commands: set priority.
Examples
# Set the QoS weight of ports with high priority of the switch to 10.
[H3C-lanswitch3/1/3-/] set qos_weight 10
1.3.36 set superview_password
Syntax
set superview_password password
undo set superview_password
View
lanswitch view
Parameters
password: Password. It is a clear password that is of 1 to 16 characters in length.
Description
Use the set superview_password command to set a password.
Chapter 1 HGMP V1 Configuration Commands
1-57