H3C S9500 Series Command Manual page 1786

Command Manual – Information Center
H3C S9500 Series Routing Switches
Table 1-10 Default information channel in each output direction
Console
Monitor
Info-center loghost
Log buffer
Trap buffer
snmp
Log file
In addition, each information channel has a default record with the module name
"default" and module number as 0xffff0000. However, for different information channel,
the default log, trap and debugging settings in the records may be different with one
another. Use default configuration record if a module does not have any specific
configuration record in the channel.
Examples
# Set to enable the log information of VLAN module in SNMP channel and allow the
output of the information with a level higher than emergencies.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] info-center source vlan channel snmp log level emergencies
1.1.16 info-center timestamp
Syntax
info-center timestamp { log | trap | debugging } { boot | date | none }
undo info-center timestamp { log | trap | debugging }
View
System view
Parameters
log: Log information.
trap: Trap information.
debugging: Debugging information.
Output direction Information channel name
console
monitor
loghost
logbuffer
trapbuffer
snmpagent
logfile
1-21
Chapter 1 Information Center