H3C S9500 Series Command Manual page 1835

Command Manual – ACSEI Server
H3C S9500 Series Routing Switches
View
ACSEI server view
Parameters
seconds: Time interval for ACSEI server to monitor ACSEI clients. It ranges from 0 to
10 (in seconds), where 0 specifies to disable ACSEI server from monitoring ACSEI
client.
Description
Use the acsei timer monitor command to set the time interval for ACSEI server to
monitor ACSEI client.
Use the undo acsei timer monitor command to restore the default.
By default, the time interval for ACSEI server to monitor ACSEI client is 5 seconds.
Examples
# Set the time interval for ACSEI server to monitor ACSEI client to 6 seconds.
<H3C> system-view
[H3C] acsei server
[H3C-acsei-server] acsei timer monitor 6
1.1.7 debugging acsei server
Syntax
debugging acsei server { error | packet | event | all }
undo debugging acsei server { error | packet | event | all }
View
User view
Parameters
error: ACSEI error debugging.
event: ACSEI event debugging.
packet: ACSEI packet debugging.
all: All ACSEI debugging.
Description
Use the debugging acsei server command to enable ACSEI debugging.
Use the undo debugging acsei server command to disable ACSEI debugging.
By default, ACSEI debugging is disabled.
Chapter 1 ACSEI Server Configuration Commands
1-4