H3C S9500 Series Command Manual page 1797

Command Manual – PoE
H3C S9500 Series Routing Switches
Power Current Value
Power Remaining Value
Power Max Value
Power Peak Value
Power Average Value
Software Version
Hardware Version
1.1.5 poe enable
Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameters
None
Description
Use the poe enable command to enable the PoE feature on a port.
Use the undo poe enable command to disable the PoE feature on a port.
By default, PoE is disabled on port.
Examples
# Enable PoE on current port.
[H3C-GigabitEthernet3/1/1] poe enable
# Disable PoE on current port.
[H3C-GigabitEthernet3/1/1] undo poe enable
1.1.6 poe enable slot
Syntax
poe enable slot slot-num
undo poe enable slot slot-num
View
System view
Chapter 1 PoE Configuration Commands
:33 W
:707 W
:740 W
:34 W
:33 W
:290
:000
1-5