Command Manual – Clock Module
H3C S9500 Series Routing Switches
Parameters
None
Description
Use the display clock d/a command to query the D/A value of the clock device.
Examples
# Display the D/A value of the clock device.
<H3C> display clock d/a
DAC Voltage : 2048
1.1.12 display clock basephase
Syntax
display clock basephase
View
Any view
Parameters
None
Description
Use the display clock basephase command to query base phase of the clock.
Examples
# Display the base phase of the clock.
<H3C> display clock basephase
clock base phase : 0x0
1.1.13 display clock lpuport
Syntax
display clock lpuport
View
Any view
Parameters
None
Chapter 1 Clock Module Commands
1-11