H3C S9500 Series Command Manual page 1788

Command Manual – Information Center
H3C S9500 Series Routing Switches
Description
Use the info-center trapbuffer command to output information to the trap buffer.
Use the undo info-center trapbuffer command to cancel output information to trap
buffer.
By default, output information is transmitted to trap buffer and size of trap buffer is 256,
that is, the trap buffer can hold 256 messages.
This command takes effect only after the system logging is enabled.
The information can be output to the trap buffer by configuring the size of the buffer.
Related commands: info-center enable, display info-center.
Examples
# Send information to the trap buffer and sets the size of the buffer to 30.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] info-center trapbuffer size 30
1.1.18 reset logbuffer
Syntax
reset logbuffer
View
User view
Parameters
None
Description
Use the reset logbuffer command to reset information in log buffer.
Examples
# Clear information in log buffer.
<H3C> reset logbuffer
1.1.19 reset trapbuffer
Syntax
reset trapbuffer
1-23
Chapter 1 Information Center