H3C S9500 Series Command Manual page 1828

Command Manual – Clock Module
H3C S9500 Series Routing Switches
1.1.18 display clock ssm-output
Syntax
display clock ssm-output
View
Any view
Parameters
None
Description
Use the display clock ssm-output command to query the SSM output level of the
clock.
Examples
# Display the SSM output level of the clock.
<H3C> display clock ssm-output
SSM output level is LNC.
1.1.19 display clock phase-lock-state
Syntax
display clock phase-lock-state
View
Any view
Parameters
None
Description
Use the display clock phase-lock-state command to query the phase lock status of
the clock.
Examples
# Display the phase lock status of the clock.
<H3C> display clock phase-lock-state
phase lock state: hold
osc state: normal, finished warm-up
Chapter 1 Clock Module Commands
1-16