H3C S9500 Series Command Manual page 1751

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
WaveLength
Length for X um: Y km/m
Length for A / B um: Y km/m
Digital diagnostic monitoring:
supported
TX power: -1.5329 dbm,
Alarm: none
RX power: -27.9578 dbm,
Alarm: none
1.2.5 display users
Syntax
display users [ all ]
View
Any view
Parameters
all: Displays all users connected to the switch.
Description
Use the display users command to view information about users connected to the
switch.
Examples
# Display the information about all the active users on the console.
<H3C> display users
+ 0 CON 0
+ 130 VTY 0
# Display the information about all the users on the console.
<H3C> display users all
Field
UI Delay Type
00:00:00
00:00:05 TEL
Chapter 1 System Maintenance and
Description
Wave length
The transmission distance of X-um sized fiber is Y
km/m
The transmission distance of the fiber with an inner
diameter of A um and outer diameter of B um is Y
km/m.
The current XFP optical module supports digital
diagnostic monitoring
TX power: Transmit power, in dbm;
Alarm: Alarm information
none: No alarm.
RX power: Receive power, in dbm;
Alarm: Alarm information
none: No alarm.
Ipaddress Username
192.168.1.253 tb
1-9
Debugging Commands