H3C S9500 Series Command Manual page 1767

Command Manual – Information Center
H3C S9500 Series Routing Switches
Parameters
None
Description
Use the display info-center command to view the configuration of system log and the
information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the size of buffer, display the
actual log/trap information.
Related commands: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel.
Examples
# Show the system log information.
<H3C> display info-center
Information Center:enabled
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Log file :
Information timestamp setting:
channel number:0, channel name:console
channel number:1, channel name:monitor
channel number:5, channel name:snmpagent
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwrote messages:0
enabled,max file buffer size 32KB, current file buffer size 7KB,
channel number : 6, channel name : logfile
max log file number : 5, max length of each log file : 2MB
log file directory : cf:/logfile
log - date, trap - date, debug - boot
1-2
Chapter 1 Information Center