H3C S9500 Series Command Manual page 1721

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
Parameters
None
Description
Use the query used addrnum command to query the number of the occupied address
entries of the switch.
Examples
# Query the occupied address entries of the switch with a position parameter of 3/1/3-/.
[H3C-lanswitch3/1/3-/] query used addrnum
Waiting.....
Unicast addrItem:7 ,Multicast AddrItem :6
Table 1-15 query used addrnum command output description
Unicast addrItem
Multicast AddrItem
1.3.22 query vdsllink
Syntax
query vdsllink [ port-list ]
View
lanswitch view
Parameters
port-list: The port list that requires configuring.
Description
Use the query vdsllink command to query the VDSL link rate of the port.
Examples
# Query the VDSL link rate of port 1 of the switch with the position parameter of "3/1/3-/"
[H3C-lanswitch3/1/3-/] query vdsllink 1
Waiting.....
======================Result of Inquiring VDSL Link======================
------------------------------LinkNo:1--------------------------------
ErrNo
Field
Number of occupied unicast MAC address entries
Number of occupied multicast MAC address entries
:0 Status
Chapter 1 HGMP V1 Configuration Commands
Description
:0 CfgUsRate:0M
1-46