H3C S9500 Series Command Manual page 1725

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
Table 1-17 search uniaddr command output description
Field
Index
ErrNo
Mac-Address
Port
Aged
PortMask
McType
1.3.26 set address agedtime
Syntax
set address agedtime agedtimevalue
View
lanswitch view
Parameters
agedtimevalue: the address aged time in seconds. If the value is 0, it means the
address will not be aged.
Description
Use the set address agedtime command to set the address aged time of the switch.
Examples
# Set the address aged time of the switch with the position parameter of "3/1/3-/" as 100
seconds.
Chapter 1 HGMP V1 Configuration Commands
Unicast MAC address entry number
Error number, which are described as follows:
0: The operation is successful
1: MAC address error
2: VLAN ID out of range
5: No address table found
Unicast address
Port number
Indicates whether this entry can be aged.
Port mask, which indicates the ports in a unicast group. For
example, value of 0 indicates the multicast group contains no
port; value of 10 indicates the multicast group contains port 2;
value of 110 indicates the multicast group contains ports 2 and
3; value of 10101 indicates the multicast group contains ports
1, 3 and 5; and so on.
Indicates how a multicast group forwards data to CPU. The
meanings of its value are:
0: Do not forward to CPU
1: Forward to CPU
2: Forward IGMP packets to the CPU
1-50
Description