H3C S9500 Series Command Manual page 1791

Command Manual – Information Center
H3C S9500 Series Routing Switches
This command only takes effect on the current terminal where the commands are input.
The debugging/log/trap information can be output to the current terminal, beginning in
user view. When the terminal monitor is shut down, no debugging/log/trap information
will be displayed in local terminal, which is equals to having performed undo terminal
debugging, undo terminal logging, undo terminal trapping commands. When the
terminal monitor is enabled, you can use terminal debugging / undo terminal
debugging, terminal logging / terminal logging and terminal trapping / undo
terminal trapping respectively to enable or disable the corresponding functions.
Examples
# Disable the terminal monitor.
<H3C> undo terminal monitor
1.1.23 terminal trapping
Syntax
terminal trapping
undo terminal trapping
View
User view
Parameters
None
Description
Use the terminal trapping command to enable terminal display function of trap
information.
Use the undo terminal trapping command to disable this function.
By default, this function is enabled.
Examples
# Enable the terminal display function of trap information.
<H3C> terminal trapping
1-26
Chapter 1 Information Center