H3C S9500 Series Command Manual page 1756

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
CPLD Version
Software Version :
CPUCard
PCB Ver
CPLD Ver
SubCard
PCB Ver
CPLD Ver
SubCard
PCB Ver
CPLD Ver
SubCard
PCB Ver
CPLD Ver
1.4 Network Connection Test Commands
1.4.1 ping
Syntax
ping [ ip ] [ -a ip-address | -c count | -d | -h ttl | -i { interface-type interface-num |
interface-name } | -n | - p pattern | -q | -r | -s packetsize | -t timeout | -tos tos | -v |
-vpn-instance vpn-instance-name ] * host
View
Any view
Parameters
-a ip-address: Specifies the source IP address of an ICMP echo request
(ECHO-REQUEST).
-c count: Specifies the number of ICMP echo requests sent, in the range 1 to
4294967295. The default value is 5.
-d: Sets socket to DEBUGGING mode. The default is non-DEBUGGING mode.
-h ttl: Specifies the TTL value for an ICMP echo request, in the range 1 to 255. The
default value is 255.
interface-type: Interface type.
interface-num: Interface number.
interface-name: Interface name.
-i: Specifies the ICMP echo request sending interface.
: 005
S9500-CMW310-F1631
1
: REV.0
: 001
1
: Ver.A
: NONE
2
: Ver.A
: NONE
3
: Ver.A
: NONE
1-14
Chapter 1 System Maintenance and
Debugging Commands