H3C S9500 Series Command Manual page 1789

Command Manual – Information Center
H3C S9500 Series Routing Switches
View
User view
Parameters
None
Description
Use the reset trapbuffer command to reset information in trap buffer.
Examples
# Clear information in trap buffer.
<H3C> reset trapbuffer
1.1.20 terminal debugging
Syntax
terminal debugging
undo terminal debugging
View
User view
Parameters
None
Description
Use the terminal debugging command to configure to display the debugging
information on the terminal.
Use the undo terminal debugging command to configure not to display the
debugging information on the terminal.
By default, the terminal display function of debugging information is disabled.
Related commands: debugging.
Examples
# Enable the terminal display debugging.
<H3C> terminal debugging
1-24
Chapter 1 Information Center