H3C S9500 Series Command Manual page 1807

Command Manual – PoE
H3C S9500 Series Routing Switches
2.1.5 display poe-power switch state
Syntax
display poe-power switch state
View
Any view
Parameters
None
Description
Use the display poe-power switch state command to display the number and current
state of the AC power distribution switches of the PSUs.
Examples
# Display the number and current state of the AC power distribution switches.
<H3C>display poe-power switch state
Switch Number : 0
Table 2-3 display poe-power switch state command output description
On
Off
High Volt Input
Low Volt Input
2.1.6 display supervision-module information
Syntax
display supervision-module information
View
Any view
Parameters
None
Field
2-4
Chapter 2 PoE PSU Supervision Commands
Description
The switch is on.
The switch is off.
The input is high voltage.
The input is low voltage.