H3C S9500 Series Command Manual page 1779

Command Manual – Information Center
H3C S9500 Series Routing Switches
1.1.12 info-center loghost source
Syntax
info-center loghost source interface-type interface-number
undo info-center loghost source
View
System view
Parameters
interface-type interface-number: Layer 3 interface on the switch.
Description
Use the info-center loghost source command to specify source address of the
packets sent to loghost as the address of the interface specified by the interface-name.
Use the undo info-center loghost source command to cancel the specified source
address of the packets sent to loghost.
Related commands: info-center enable, display info-center.
Examples
# Specify source address of the packets sent to loghost as the address of the VLAN
interface 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] info-center loghost source vlan-interface 1
1.1.13 info-center monitor channel
Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameters
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Channel name. The name can be channel7, channel8, channel9,
console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile.
1-14
Chapter 1 Information Center