H3C S9500 Series Command Manual page 1735

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
1.3.40 speed port
Syntax
speed port port-list { auto | 10m | 100m| 1000m}
View
lanswitch view
Parameters
port-list: List of ports.
auto: Specifies to operate in automatic negotiation mode.
10m: Specifies to operate at a speed of 10 Mbps.
100m: Specifies to operate at a speed of 100 Mbps.
1000m: Specifies to operate at a speed of 1000 Mbps.
Description
Use the speed port command to set a port rate for specified ports of a switch.
Ethernet ports that are of 10/100Base-T can operate at a speed of 10 Mbps or 100
Mbps. Whereas Ethernet optical ports that are of 100M can operate at a speed of 100
Mbps and 1,000 Mbps.
Examples
# Set the port rate to 10M bps for the port 1 through 4 of the switch with a position
parameter of 3/1/3-/.
[H3C-lanswitch3/1/3-/] speed port 1-4 10m
Waiting.....
operating LANSWITCH[3/1/3-/]'s ports successfully
Chapter 1 HGMP V1 Configuration Commands
1-60