H3C S9500 Series Command Manual page 1723

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
1.3.24 search multiaddr
Syntax
search multiaddr mac-addr-list vlanid vlanid-list
View
lanswitch view
Parameters
mac-addr-list: List of MAC addresses to be searched. This argument can contain up to
four MAC addresses.
vlanid-list: List of VLAN IDs corresponding to those specified by the mac-addr-list
argument.
Description
Use the search multiaddr command to search specified multicast addresses in the
address table of a switch.
Examples
# Search an address entry in the multicast address table of the switch with a position
parameter of 3/1/3-/.
[H3C-lanswitch3/1/3-/] search multiaddr 01e0-fc01-0001 vlanid 2
Waiting.....
==================Search addrTab result========================
No ErrNo
0
===================================================================
ErrNo Mean:0-Success,1-invalid Mac,2-Vlanid out rang 5-not found addrTab
Table 1-16 search multiaddr command output description
Field
No
ErrNo
Mac-Address
Port
Aged
Mac-Address
0 01-e0-fc-01-00-01
Multicast group number
Error number, which are described as follows:
0: The operation is successful
1: MAC address error
2: VLAN ID out of range
5: No address table found
Multicast address
Port number
Indicates whether the entry can be aged
Chapter 1 HGMP V1 Configuration Commands
VlanId Port
1 - -
Description
1-48
Aged PortMask mcType
0 -