H3C S9500 Series Command Manual page 1824

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Command Manual – Clock Module

H3C S9500 Series Routing Switches

Use the display clock lpuport command to query the LPU port to output the clock

reference source.

# Display the LPU port to output the clock reference source.

<H3C> display clock lpuport

the LPU port which output clock reference:

1.1.14 display clock source

display clock source

Use the display clock source command to query the status of the 18 clock sources.

# Display the status of the 18 clock sources.

<H3C> display clock source

No primary reference is traced

lpu port(slot-card-port)

lpu port(slot-card-port)

Chapter 1 Clock Module Commands

Chapters

Table of Contents