H3C S9500 Series Command Manual page 1798

Command Manual – PoE
H3C S9500 Series Routing Switches
Parameters
slot-num: Number of the slot where the board resides.
Description
Use the poe enable slot command to enable PoE on a board.
Use the undo poe enable slot command to disable PoE on a board.
By default, PoE is disabled on a board.
The switch checks that the total power of the current system is sufficient before allowing
you to enable PoE on the board by using this command.
Examples
# Enable PoE on the board in slot 2.
[H3C]poe enable slot 2
# Disable PoE on the board in slot 2.
[H3C]undo poe enable slot 2
1.1.7 poe legacy enable slot
Syntax
poe legacy enable slot slot-num
undo poe legacy enable slot slot-num
View
System view
Parameters
slot-num: Number of the slot where the board resides.
Description
Use the poe legacy enable slot command to enable the board to detect the
compatibility of the PD connected to it.
Use the undo poe legacy enable slot command so that the board does not detect the
compatibility of the PD connected to it.
When detecting the compatibility of PDs, the board can detect and power the PDs
incompatible with the 802.3af standard.
Chapter 1 PoE Configuration Commands
1-6