H3C S9500 Series Command Manual page 1752

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
+ 0 CON 0
129 AUX 0
+ 130 VTY 0
131 VTY 1
132 VTY 2
133 VTY 3
134 VTY 4
Table 1-4 display users command output description
Field
+
UI
Delay
Type
Ipaddress
Username
1.2.6 display version
Syntax
display version
View
Any view
Parameters
None
Description
Use the display version command to view such information as software version, issue
date and the basic hardware configurations.
Examples
# Display the information about the system version.
UI Delay Type
00:00:00
00:00:16 TEL
Information about an active user
The first number is the absolute number of the UI (user interface),
and the second number is the relative number of the UI.
The time elapsing after the last user input, in the format of
hh:mm:ss
User type, such as Telnet, SSH, PAD
Initial connection location, that is, the IP address of the incoming
host
Name of the user who uses this UI, that is, the login username of
this user. If the current terminal line is in anonymous login mode
(AAA authentication is enabled on it), this field is null
Chapter 1 System Maintenance and
Ipaddress Username
192.168.1.253 tb
Description
1-10
Debugging Commands