H3C S9500 Series Command Manual page 1796

Command Manual – PoE
H3C S9500 Series Routing Switches
Software Version
Hardware Version
CPLD Version
Table 1-2 display poe pse command output description
Power Current Value
Power Remaining Value
Power Max Value
Power Peak Value
Power Average Value
Software Version
Hardware Version
Note:
The sampling cycle of the current power of the interface card is 1 minute, and the
sampling cycle of the peak power and average power is 5 minutes.
1.1.4 display poe slot
Syntax
display poe slot slotnum
View
Any view
Parameters
slotnum: Slot number of a PoE card
Description
Use the display poe slot slotnum command to display the information of a PoE card in
the switch.
Examples
# Display the information of the PoE card in slot 8 of the switch.
<H3C> display poe slot 8
PSE Information of board 8:
:290
:000
:021
Field
1-4
Chapter 1 PoE Configuration Commands
Description
Current power of the card
Remaining power of the card
Maximum power of the card
Peak power of the card
Average power of the card
PSE software version
PSE hardware version