H3C S9500 Series Command Manual page 1724

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
Field
PortMask
McType
1.3.25 search uniaddr
Syntax
search uniaddr mac-addr-list
View
lanswitch view
Parameters
mac-addr-list: List of MAC addresses to be searched. This argument can contain up to
four MAC addresses.
Description
Use the search uniaddr command to search specified unicast address entries in the
address table of a switch.
Examples
# Search an address entry in the unicast address table of the switch with position
parameter of 3/1/3-/.
[H3C-lanswitch3/1/3-/] search uniaddr 0e0-fc11-1001
Waiting.....
=================Search addrTab result========================
No ErrNo
0 0
================================================================
ErrNo Mean:0-Success,1-invalid Mac,2-Vlanid out rang 5-not found addrTab
Port mask, which indicates the ports in a multicast group. For
example, value of 0 indicates the multicast group contains no
port; value of 10 indicates the multicast group contains port 2;
value of 110 indicates the multicast group contains ports 2 and
3; value of 10101 indicates the multicast group contains ports
1, 3 and 5; and so on..
Indicates how a multicast group forwards data to CPU. The
meanings of its value are:
0: Do not forward to CPU
1: Forward to CPU
2: Forward IGMP packets to the CPU
Mac-Address
00-e0-fc-11-10-01
1-49
Chapter 1 HGMP V1 Configuration Commands
Description
VlanId Port Aged
- 1 Aged
PortMask mcType
- -