H3C S9500 Series Command Manual page 1775

Command Manual – Information Center
H3C S9500 Series Routing Switches
View
System view
Parameters
None
Description
Use the info-center enable command to enable the system log function.
Use the undo info-center enable command to disable system log function.
By default, system log function is enabled.
Only after the system log function is enabled can the system output the log information
to the info-center loghost and console, and so on.
Related commands: info-center loghost, info-center logbuffer, info-center
console channel, info-center monitor channel, display info-center, info-center
enable.
Examples
# Enable the system log function.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] info-center enable
1.1.9 info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]*
undo info-center logbuffer [ channel | size ]
View
System view
Parameters
channel: Configures the channel to output information to buffer.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specifies the channel name. The name can be channel7, channel8,
channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile.
size: Configures the size of buffer.
buffersize: Size of buffer (number of messages which can be kept).
1-10
Chapter 1 Information Center