H3C S9500 Series Command Manual page 1771

Command Manual – Information Center
H3C S9500 Series Routing Switches
Overwritten messages : 0
Current messages : 91
1.1.4 display logbuffer summary
Syntax
display logbuffer summary [ level severity ]
View
Any view
Parameters
level: Level of information severity.
severity: Information level, do not output information below this level. Information at
different levels is as the following table:
Table 1-4 Severity levels defined in the information center
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Description
Use the display logbuffer summary command to view the summary information
recorded in logbuffer.
Related commands: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel.
Examples
# Show the summary information recorded in logbuffer.
<H3C> display logbuffer summary
EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0
Value
1
2
3
4
5
6
7
8
0 0 94 0
1-6
Description
Information on system unavailability
Information requiring immediate reaction
Critical information
Error information
Warning information
Normal but important information
Notification that should be recorded
Information generated during debugging
1 0
Chapter 1 Information Center