H3C S9500 Series Command Manual page 1747

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
[H3CLANSwitch]
1.2 Querying System Status and Configuring Agent
Information
1.2.1 display clock
Syntax
display clock
View
Any view
Parameters
None
Description
Use the display clock command to display the system date and time information, so
that you make timely changes if the system time is incorrect.
The maximum time value supported by this command is 23:59:59 2100/12/31.
Related commands: clock datetime.
Examples
# View the current system date and time.
<H3C> display clock
18:36:31 beijing Sat 2006/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
Table 1-1 display clock command output description
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00
2003/01/01 01:00:00 2003/08/08
01:00:00
Field
1-5
Chapter 1 System Maintenance and
Debugging Commands
Description
Current system time
Configured time zone information
Configured summer time information