H3C S9500 Series Command Manual page 1800

Command Manual – PoE
H3C S9500 Series Routing Switches
[H3C-GigabitEthernet3/1/1] undo poe max-power
1.1.9 poe max-power slot
Syntax
poe max-power max-power slot slot-num
undo poe max-power slot slot-num
View
System view
Parameters
max-power: Maximum power distributed to the card, ranging from 37 W to 740 W.
slot-num: Slot number of a card.
Description
Use the poe max-power command to set the maximum power on a card.
Use the undo poe max-power command to restore the default maximum power on the
card.
By default, the maximum power on a card is 740 W.
Examples
# Set the maximum power on the card in slot 3 to 400 W.
[H3C] poe max-power 400 slot 3
# Restore the default maximum power on the card.
[H3C] undo poe max-power slot 3
1.1.10 poe mode
Syntax
poe mode { signal | spare | auto }
undo poe mode
View
Ethernet port view
Parameters
signal: The port supplies power through signal lines.
spare: The port supplies power through spare lines.
auto: The port supplies power in automatically selected mode.
Chapter 1 PoE Configuration Commands
1-8