H3C S9500 Series Command Manual page 1787

Command Manual – Information Center
H3C S9500 Series Routing Switches
boot: Time elapsing after system starts. Format: xxxxxx.yyyyyy, xxxxxx is the high 32
bits of the elapsed time (in milliseconds) after system starts, and yyyyyy is the low 32
bits.
date: Current system date and time. It shows as yyyy/mm/dd-hh:mm:ss in Chinese
environment and mm dd hh:mm:ss yyyy in Western language environment.
none: No timestamp format.
Description
Use the info-center timestamp command to configure the timestamp output format in
debugging/trap information.
Use the undo info-center timestamp command to disable the output of timestamp
field.
By default, date stamp is used.
Examples
# Configure the debugging information timestamp format as boot.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] info-center timestamp debugging boot
1.1.17 info-center trapbuffer
Syntax
info-center
channel-name } ]*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameters
size: Configures the size of the trap buffer.
buffersize: Size of trap buffer (numbers of messages).
channel: Configures the channel to output information to trap buffer.
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Channel name which can be the channel7, channel8, channel9,
console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile
trapbuffer [ size
1-22
buffersize | channel
Chapter 1 Information Center
{ channel-number |