H3C S9500 Series Command Manual page 1720

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
Parameters
spec-port: Port number of the port to be queried.
index: Index for the address entry, in the range of 1 to 4,095.
shownum: Number of entries to be queried, in the range of 1 to 100. For output
information with more than 100 entries, only the first 100 entries are displayed.
Description
Use the query uniaddr port command to query the unicast address entries of a
specified port of a switch.
Examples
# Query the unicast address entries of the port 2 of the switch with a position parameter
of 3/1/3-/.
[H3C-lanswitch3/1/3-/] query uniaddr port 2 1 50
Waiting.....
================Result of Inquire AddrTable=======================
Index
0
=======================Some Explain===============================
1 Aged mean:0-No aged,other value- aged to delete
2 Total Number of the addrtable :
=========================End===================================
Table 1-14 query uniaddr port command output description
Field
Index
Mac-addr
Aged
1.3.21 query used addrnum
Syntax
query used addrnum
View
lanswitch view
Mac-addr
00-e0-fc-01-10-00
Index of an address entry
Unicast MAC address
Indicates whether an address entry can be aged. The value of 0
indicates the entry is not aged. Other values indicate the address entry
can be aged. An aged address entry is removed by the system.
Chapter 1 HGMP V1 Configuration Commands
Aged | Index
1 | 1 00-00-00-00-00-00
1
Description
1-45
Mac-addr Aged
0