H3C S9500 Series Command Manual page 1745

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
1.1.3 clock timezone
Syntax
clock timezone zone-name { add | minus } HH:MM:SS
undo clock timezone
View
User view
Parameters
zone-name: Name of the time zone, which is a character with the length ranging from 1
to 32.
add: Time is adding compared with the UTC.
minus: Time is minus compared with the UTC.
HH:MM:SS: Time (hour/minute/second).
Description
Use the clock timezone command to set the information of the local time zone.
Use the undo clock timezone command to restore to the default Universal Time
Coordinated (UTC) time zone.
After the configuration takes effect, the display clock command can be used to check
it. Besides, the time of the log or debug information uses the local time after the
adjustment of the time zone and summer time.
Related commands: clock summer-time.
Examples
# Set the name of the local time zone to Z5 with five hours ahead compared with the
UTC time.
<H3C> clock timezone z5 add 05:00:00
1.1.4 quick-ping enable
Syntax
quick-ping enable
undo quick-ping enable
View
System view
Chapter 1 System Maintenance and
1-3
Debugging Commands