H3C S9500 Series Command Manual page 1730

Command Manual – Cluster Management
H3C S9500 Series Routing Switches
1.3.32 set mirror monitor-port
Syntax
set mirror monitor-port monitor-port [ port-list ]
undo set mirror
View
lanswitch view
Parameters
monitor-port: Monitor port.
port-list: List of ports to be mirrored.
Description
Use the set mirror monitor -port command to set Ethernet port mirroring.
Use the undo set mirror command to remove the configuration.
You cannot specify a trunk port as a monitor port. The existing monitor port is
automatically removed if you set a new monitor port. But the mirroring port remains
unchanged.
Related commands: query mirror.
Examples
# Set the port 1 of the switch with a position parameter of 3/1/3-/ to be a monitor port.
[H3C-lanswitch3/1/3-/] set mirror monitor-port 1
1.3.33 set port
Syntax
set port port-list vlanid vlan-id-list [ tagged | untagged ]
View
lanswitch view
Parameters
port-list: List of ports to be set. Be sure to provide a valid port number if you want to
specify a single port. You can input a single number for the argument, which identifies
one object. You can input a character string in such format as 3-7, which identifies
objects 3 through 7. You can also use commas to connect single numbers and
character strings.
Chapter 1 HGMP V1 Configuration Commands
1-55