H3C S9500 Series Command Manual page 1793

Command Manual – PoE
H3C S9500 Series Routing Switches
Chapter 1 PoE Configuration Commands
1.1 PoE Configuration Commands
1.1.1 display poe interface
Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Port type and port number.
Description
Use the display poe interface interface-type interface-number command to display
the PoE status of a specific port on the switch.
Use the display poe interface command without any option to display the PoE status
of all the PoE-capable ports on the switch.
Examples
# Display the PoE status of the port GigabitEthernet 3/1/1.
<H3C> display poe interface GigabitEthernet3/1/1
Port power status
Port power mode
Port PD class
port power priority
Port max power
Port current power
Port remaining power
Port average power
Port peak power
Port current
Port voltage
Chapter 1 PoE Configuration Commands
:delivering
:signal
:2
:high
: 15400 mW
:552 mW
: 14848 mW
:717 mW
:1196 mW
:13 mA
:53.7 V
1-1