H3C S9500 Series Command Manual page 1746

Command Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
Parameters
None
Description
Use the quick-ping enable command to enable the PING distribution function.
Use the undo quick-ping enable command to disable the PING distribution function.
By default, the PING distribution function is enabled.
Examples
# Enable the ping distribution function.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] quick-ping enable
1.1.5 sysname
Syntax
sysname sys-name
undo sysname
View
System view
Parameters
sys-name: Hostname of the switch, a string of 1 to 30 characters. The default hostname
of the switch is H3C.
Description
Use the sysname command to configure the system name of the switch.
Changing the hostname name of the switch will affect the prompt of command line
interface. For example, if the system name of the switch is H3C, and the prompt in user
view is <H3C>.
Use the undo sysname command to restore the system name of the switch to the
default value.
Examples
# Set the system name of the switch to H3CLANSwitch.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] sysname H3CLANSwitch
Chapter 1 System Maintenance and
1-4
Debugging Commands