Line Filter - Siemens PM250 Hardware Installation Manual

Accessories
7.1 Reactor and filter
7.1.1

Line filter

Installing the line filter as base component
The line filters associated with the Power Modules of a rated power (HO) up to 11 kW are
designed as base components. The line filter is attached to the mounting surface and the
Power Module is mounted directly on the line filter.
The cables to the Power Module are already connected to the line filter. The line filter is
connected to the line supply through terminals.
Figure 7-2
The overall and mounting dimensions of the line filter are written in the technical
specifications.
54
Connecting the line filter as base component
Hardware Installation Manual, 09/2012, A5E01003502B AD
PM250 Power Module