Error Codes Returned In Xml Response Messages - Mitsubishi Electric Melsec Q Series User Manual

10
TROUBLESHOOTING

10.2.3 Error codes returned in XML response messages

Error code
0x41170101
0x41170103
0x41171101
0x41171111
0x41171201
0x41171205
0x41171301
0x41173101
0x41173103
0x41173105
Table 10.9 Error codes returned in XML response messages
Error name
System error —
XML message length The length of the received XML
error message is invalid.
The received XML request message is
XML request message invalid.
interpretation error Data are not properly formatted as an
XML message.
The XML request message route is
Duplicated XML request
duplicated.
message route
Multiple (Request) tags exist.
There is an invalid route for XML
XML request message
request message transmission.
route error
Any tag other than (Request) exists.
The attribute in the received XML
request message is invalid.
Failed to identify the message type is
XML request message, oneshot, validate, or invalidate.
attribute error Attribute "type" does not exist.
Attribute "type" value is invalid.
Attribute "jobname" does not exist.
The XML declaration is incorrect.
The jobname in the received XML
XML request message, request message is invalid.
jobname error The job of the specified jobname does
not exist.
Failed in one-shot execution of the job
Job execution error which is requested by the XML
processing function.
System error —
10.2.3 Error codes returned in XML response messages
Description
• Please consult your local Mitsubishi
representative.
• Check the content of the sent XML
message.
• Check if the job is already in
execution.
• Check if the MES interface module
is operating.
• Check CompactFlash card status
(X1) and File access status (X2).
• Execute the job after starting the
module and sampling tag data.
• Please consult your local Mitsubishi
representative.
10.2 Error Code List
Action
Section 3.6.7 (2) Sampling
information (Buffer memory
address: 1004 to 1007)
10
- 36
9
10