Importing A Csv File - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.4.5 Importing a CSV file

Import an existing CSV file.
Any setting can be selected from a CSV file edited on a personal computer, and it can be
imported into the setting of the current project.
[System setting], [Access target CPU settings] and [Device tag settings] can be imported.
1
2
3
Save the import target CSV files shown in Table 7.13 in the same folder.
The files, which are shown as "Required" in the "Saving in folder" column of Table
7.13, must be saved in the same folder. (If any one of them is missing, an error is
detected.)
When the file shown as "Optional" is not included in the folder, it is imported with its
settings treated as disabled (no settings).
Import target CSV file
• [System setting] - [Network setting]
SYSTEM.CSV
• [System setting] - [Time synchronization setting]
ACCOUNT.CSV [System setting] - [Account setting]
[System setting] - [Time synchronization setting] -
DST.CSV
[Daylight saving setting]
CPU.CSV [Access target CPU setting]
TAG.CSV [Device Tag setting]
COMPONENT.CSV [Device Tag setting] - [Component setting]
Select [Project] [Import]
The [Open] dialog box is displayed.
Set the following items and click the
Table 7.14 Setting items in the [Open] dialog box
Item
Look in Select the location where the CSV file is stored.
Specify "SYSTEM.CSV".
Files shown in the above
File name
(SYSTEM.CSV) are the import target CSV files.
For files to be imported, refer to the following:
Files of type Select [CSV file(SYSTEM.CSV)].
Table 7.13 Import target CSV files
Settings to be imported
[CSV Files] from the menu.
Open
button.
Figure 7.15 [Open] dialog box
Description
1
and in the same folder as the specified file
Appendix 3 Setting Information File Format (CSV File Format)
7.4 Project File Handling
7.4.5 Importing a CSV file
1
2
3
Saving in
folder
Required
4
Required
Optional
Required
Required
Required
5
6
7
8
7
- 13