Mitsubishi Electric Melsec Q Series User Manual page 39

2
SYSTEM CONFIGURATION
Applicable module
CPU type
Universal model
QCPU
Programmable
controller CPU
RCPU
Safety CPU
C Controller module
Table 2.1 Applicable modules and base units, and No. of modules (continue)
Serial No. (first five digits) of
CPU model QJ71MES96N
Q50UDEHCPU
Q100UDEHCPU
Q03UDVCPU
Q04UDVCPU All versions
Q06UDVCPU
Q13UDVCPU
Q26UDVCPU
R04CPU
R08CPU
R16CPU All versions
R32CPU
R120CPU
QS001CPU
Q06CCPU-V
Q06CCPU-V-B
*5
Q12DCCPU-V
All versions
Q24DHCCPU-V
Q24DHCCPU-LS
*1 Limited within the range of I/O points for the CPU module.
*2 Can be installed to any I/O slot of a base unit.
*3 Can access host station only. Cannot access other stations.
*4 RCPU can be mounted on the RQ extension base unit or Q series extension base unit which is
routed from RQ extension base unit.
*5 Use the Q12DCCPU-V whose serial No. (first five digits) is 12042 or later.
Use a MES interface module appropriate to each CPU module.
If an unsupported one is used for a CPU module, it does not function normally.
(b) When mounting to remote I/O station of MELSECNET/H
The MES interface module cannot be mounted to remote I/O station of the
MELSECNET/H.
Mount the MES interface module to a CPU module of the master station.
supported module
No. of modules
QJ71MES96
11052 or later
14122 or later
16072 or later
- -
- -
12092 or later
14122 or later
2.2 Applicable Systems
(From the previous page)
*2
Base unit
*1
Main base
Extension
*1
base unit
unit
64
59 ×
N/A ×
N/A ×
64
62
:Applicable ,
1
2
3
*4
×
×
4
:N/A
×
5
6
7
8
2
- 6