Mitsubishi Electric Melsec Q Series User Manual page 281

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(3) Setting example of [Operation action]
The following is a case in which correction power is calculated using a correction
voltage and it is assigned to a tag component (Process 1. Correction power).
The tag component value (Process 1. Correction power) obtained from the following
[Operation action] is:
(Process 1. Voltage
Table 7.83 Variable types and values available for [Component]
Variable type
Up to 16 characters
For the characters that can be used for variables, refer to the following.
[Variable]
×
100 + 50)
Figure 7.94 Setting example of [Operation action]
Values (variable names) that can be entered in [Component]
Appendix 2.2 Characters that can be used for item names,
component names, variable names, etc. in the product
×
Current
7.11 Job Setting - Actions
7.11.4 Setting items in Operation action
1
2
3
4
5
6
7
8
7
- 123