Mitsubishi Electric Melsec Q Series User Manual page 263

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(7) Select sort settings
When [Select] or [MultiSelect] is selected in [Action type], set conditions for sorting the
records to be selected/multi-selected.
If multiple sort conditions are set, the database will process the conditions in order,
starting from the top.
In [Select sort settings], settings of up to eight lines are allowed for each
communication action.
(a) Field name (Up to 32 characters)
(b) Order
7.11.2 Setting items in Communication action (Select/Update/Insert/MultiSelect/Delete)
Figure 7.82 [Select sort settings]
Set a field name for records to be selected.
For characters that can be used for field names and table names, refer to the
following.
Appendix 2.4 Characters available for field names, table names, stored
procedure names,etc.
For browsing the field names in the database, refer to the following:
(8) Browse field name in this section
Set the order of sorting the selected records.
Item
Sorts the records so that the specified fields are arranged in ascending
Ascending order
order.
Sorts the records so that the specified fields are arranged in descending
Descending order
order.
Table 7.75 Setting items for [Order]
Description
7.11 Job Setting - Actions
1
2
3
4
5
6
7
8
7
- 105