Mitsubishi Electric Melsec Q Series User Manual page 350

10
TROUBLESHOOTING
Error code
00F1h
00F2h
0100h
to
0104h
0110h
0112h
0180h
0181h
0182h
0190h
0191h
0192h
0193h
0200h
to
0203h
0210h
0300h
0301h
0400h
to
0402h
0480h
0481h
0482h
0483h
0490h
to
0493h
0494h
10
- 9 10.2 Error Code List
10.2.1 Error codes for the MES interface module
Table 10.3 Error codes for the MES interface module
Error name
The specified intelligent (or special)
Special module bus error function module is not ready for
processing.
No response has been received from
Special module timeout the specified intelligent (or special)
function module.
System error —
A switch setting error was detected in
Switch setting error
the hardware test.
A ROM error was detected in the
ROM check sum error
hardware test.
A RAM error was detected in the
RAM test error
hardware test.
Timeout error
Communication error
An error occurred in the self-loopback
test.
Comparison error
In-frame position error
System error —
No CompactFlash card has been
installed.
Setting file read error
Failed to read out the setting file. (The
setting file is corrupted.)
System error —
Unable to initialize the CompactFlash
CF card initialization error
card.
CF card drive data Unable to read out the drive
retrieve error information of the CompactFlash card.
Failed to mount the CompactFlash
CF card mount failure card because a CompactFlash card
error has been detected.
System error —
Failed to format the CompactFlash
CF card format error
card.
Description
• Examine the hardware of the
• Please consult your local Mitsubishi
• Check the intelligent function
• Conduct the hardware test again.
• Conduct the hardware test again.
• Hardware failure
• Please consult your local Mitsubishi
• Please consult your local Mitsubishi
• Install a CompactFlash card.
• Retry writing the setting with MES
• Please consult your local Mitsubishi
• Check if the CompactFlash card
• Replace the CompactFlash card.
• Please consult your local Mitsubishi
• Check if the CompactFlash card
• Check the CompactFlash card for
(From the previous page)
Action
intelligent (or special) function
module.
representative.
module switch setting.
representative.
representative.
Interface Function Configuration
Tool.
representative.
was inserted properly.
representative.
was inserted properly.
any error. (Perform check disk on
the personal computer.)
(To the next page)