Importing/Exporting Files - Mitsubishi Electric Melsec Q Series User Manual

8
DB CONNECTION SERVICE AND SETTING TOOL
(6) Log character code

8.6 Importing/Exporting Files

Import/export files.
(1) Import
8
- 20 8.6 Importing/Exporting Files
(Default: ASCII/SJIS)
Specify the character code of the log file (access log, SQL failure log) that is output by
DB connection service in ASCII/SJIS or Unicode.
The specified character code will be enabled after reflecting the settings.
When the setting file exported by using DB Connection Service Setting Tool
version 1.12N or earlier is imported by the version 1.14Q or later, the log character
code will be set to "ASCII/SJIS" (the default).
Import a saved file.
1 Select [File] [Import] from the menu.
2 The [Open] dialog box is displayed.
Set the following items, then click the
Item
Look in
File name
Files of type
When importing a file, use the one that was stored by the export function.
Do not edit any export file.
The setting files exported by using DB Connection Service Setting Tool version
1.14Q or later cannot be used in version 1.12N or earlier.
Open
Figure 8.11 [Open] dialog box
Table 8.8 Setting items in the [Open] dialog box
Select the location where the file is stored.
Specify the name of the file to be imported.
Select a type of the file to be imported.
• DB connection service setting files
button.
Description